Installation - Alder Hub
Installing Your Hub
The Hub is essential for every security system. All sensors, panels, and other equipment will communicate with the Hub via wireless connections. Likewise, the Hub functions as a connection between your security system and our monitoring station.
However, if you do not have the ability to connect to your home internet router, you may skip steps 1 and 2 and simply plug your Hub into an AC outlet.
TO INSTALL YOUR HUB
We recommend using your home internet router.
If you are unable to connect to your home router via ethernet, your system will default to using the 4G LTE cellular backup network to stay connected to our monitoring station at all times.
- 1. Locate your internet modem or router and the nearest electrical outlet to your router
- 2. Use the included ethernet cable to connect the ethernet port (located on the side of the Hub) to any open ethernet port on your internet modem or router. Do NOT unplug the ethernet cable that connects your router to your modem.
Please note: If your home has multiple active ethernet ports, you may also plug the Hub into any of your active ethernet ports instead of your modem or router.
- 3. Use the included power cable to connect the power jack on the side of the Hub to a standard AC outlet. We recommend using the included screw to secure the plug to the outlet.
- 4. Wait 1–3 minutes. Once the Hub is connected, the "Network Connectivity" LED indicator light will turn solid green.
RECOMMENDED INSTALLATION LOCATIONS
The Hub should be connected to your modem or Wi-Fi router in a central part of your home. Place your Hub on a table or countertop to maximize the range.
LOCATIONS TO AVOID
Since the Hub includes the main siren, avoid installing your Hub in the following areas of your home:
- On the ground
- In basements and closets
- Anywhere the sound of the siren will be muffled
- Within 4 feet of large metal objects or appliances (like refrigerators, televisions, or washing machines)
- Areas where intruders might easily see the Hub (such as near windows)
SETTINGS
All Hub settings are managed through the Alarm Panel. For instructions on adjusting your Hub settings, see page 15.
TECHNICAL SPECIFICATIONS
Body Dimensions: 8.75" x 9" x 1.5"
Weight: 29.5 oz. (including battery)
Operating Temperature: 32°F to 120°F
Maximum Humidity: 85% non-condensing
Radio Frequencies: 433.92MHz, 2.4GHz, adapted for 345 MHz
Power Supply Part Number: RE012-6 (US), RE012-7 (AUS), RE012-8 (CE)
Input: 100-240VAC, 50/60 Hz, 0.5A
Output: 12VDC, 1A
Battery Part Number: RE029
Backup: 24 hrs minimum (4 hours minimum for RE6130)
Specifications: 6VDC, 2.5Ah, NiMH
Battery Charger: 25mA (Trickle), 95mA (Fast)
Sensors: Up to 96 compatible wireless security zones
Interface Devices: Up to 4 alarm panels
Maximum # of Users: 50